SPE 6.7L Powerstroke CP3 Conversion

The factory CP4 pump on the 6.7 Powerstroke has a reputation — and not a good one. The SPE Motorsport CP3 Conversion Kit was built from the ground up to eliminate those issues while keeping vital engine systems operational. 

Unlike “OTHER” pump setups, our conversion doesn’t suffer from timing issues or excessive load on the crank gear. That means less stress, fewer headaches, and better long-term durability — especially important for hard-use applications. The last thing you want is a catastrophic engine failure due to the crank gear slipping. When this happens the cost of a fuel system will seem cheap. We move this load to the snout of the crankshaft so it is no longer being driven by an interference fit timing gear. The slipping timing gear problem for the 6.7 needed to be addressed and fixed, not made worse! 

We reengineered the fuel system by moving the pump out of the valley and driving it via a proper ratio Pulley and serpentine belt. This improves access, and cuts install time. For decades there have been PTO pumps, compressors, and extra fuel pumps driven by serpentine belts on diesel engines; the 8 rib belts are easily up to the task. The testing has been done over decades and millions of miles. Proving the reliability of the serpentine drive system! 

The real win: this is a 100% factory replacement system. No tuning is required. Thanks to the way we designed the drive system and fuel routing, everything works seamlessly with your stock calibration. No extra wiring or jumpers, and all of the factory fuel lines are retained! Just bolt it on, plug it in, and go.

Thanks to that optimized drive ratio, you can run a standard CP3 pump and still move the same volume as modified pumps that cost twice as much. That means more performance without breaking the bank.  

Unlike other alternative pump options on the market, if you ever need a replacement, you can get a CP3 from virtually anywhere — dealerships, warehouse suppliers, or even local diesel shops. The kit comes exclusively with a brand new Exergy Performance CP3.

Features & Benefits:

• 100% factory replacement – no tuning required
• Retains all of the factory fuel lines
  
• No twin-pump pulse timing issues
  
• Less crank gear load - Eliminating the chance of slippage caused by pump load
  
• Better serviceability with the pump out of the valley changing a pump is minutes not hours
  
• Proven belt-driven design (no overheating or engine damage if a failure occurs)
  
• OEM CP3 compatibility Proven reliability and availability
  
• Retains the factory vacuum pump 
• Includes Exergy Performance CP3

This system replaces the factory CP4 with a CP3 fuel pump that eliminates crank gear load, improves serviceability, and delivers rock-solid reliability — all without needing any tuning. It’s a true bolt-on, factory replacement that retains your OEM fuel lines. This is a clean, reliable, serviceable upgrade that solves problems that no other system does.

VEHICLE COMPATABILITY:

• 2011 F250/F350/F450 6.7L Powerstroke
• 2012 F250/F350/F450 6.7L Powerstroke
• 2013 F250/F350/F450 6.7L Powerstroke
• 2014 F250/F350/F450 6.7L Powerstroke
• 2015 F250/F350/F450 6.7L Powerstroke
• 2016 F250/F350/F450 6.7L Powerstroke
• 2017 F250/F350/F450 6.7L Powerstroke
• 2018 F250/F350/F450 6.7L Powerstroke
• 2019 F250/F350/F450 6.7L Powerstroke
• 2020 F250/F350/F450 6.7L Powerstroke
• 2021 F250/F350/F450 6.7L Powerstroke
• 2022 F250/F350/F450 6.7L Powerstroke
• 2023 F250/F350/F450 6.7L Powerstroke
• 2024 F250/F350/F450 6.7L Powerstroke
• 2025 F250/F350/F450 6.7L Powerstroke
• 2026 F250/F350/F450 6.7L Powerstroke

Built in-house by Snyder Performance Engineering. Fueled by Exergy Performance.