Horn Blasters Conductor's Special 228H Train Horn Kit

GET THE HORNS. DON'T MESS WITH THE BULL.

Enhance your vehicle's presence on the road with the HornBlasters Conductor's Special 228H train horn kit. Armed with the Shocker XL train horns, this compact kit is for those who don't want to compromise on loudness when space and budget are at a premium. With everything included from start to finish and the pre-assembled and pre-wired air source unit, this kit will ensure you're up and honking in no time!

• Unrivaled Power in Compact Design: Experience the staggering intensity of a locomotive with the Shocker XL, optimized for both minimalistic Smart Cars and grand Semis.
• Resilient Through the Elements: With a weather-resistant air source unit and the horns being constructed from fiberglass-reinforced ABS with stainless steel internals, our kit ensures durability and longevity regardless of environmental challenges.
• Effortless Setup: Dive into the symphony quicker with a pre-assembled and pre-plumbed tank and compressor, complete with all necessary hardware for seamless installation.
• Optimal Performance Metrics: Deliver a powerful 4-second honk time with a swift 55-second recovery, ensuring you're always ready for the next attention-grabbing honk.
• Versatile Air System: Beyond its honking capabilities, the 228H air source unit can be utilized to inflate tires or power small air tools, adding a layer of practicality to its impressive performance.

• Includes

  • Shocker XL train horns
  • HornBlasters 2-gallon 150 psi air source unit
  • 110/145 PSI pressure switch with leads
  • 10ft of 5/16" D.O.T. approved air line
  • 17ft of 1/2" D.O.T. approved air line
  • 22ft of 10-gauge red wire
    
  • 22ft of 18-gauge blue wire
  • 22ft of 18-gauge grey wire
  • 1/2" NPT Black Widow stainless steel electric air valve
  • Brass NPT fitting kit with drain cock & safety blow-off
  • Complete Wiring Kit with Fuse Holder & Fuses
    
  • Mounting hardware
  • Air Line Cutter
  • Ear Plugs
  • Detailed instructions

  • Specifications / Fill Rates

    Part Number	HK-S4-228H
    Operating Pressure	150 PSI
    Restart Pressure	110 PSI
    Voltage	12-Volt DC
    Horn	Shocker XL train horn
    Horn Material	High-impact fiberglass reinforced ABS
    Horn Measurements	№ 1 19.50″ (495.30 mm) № 2 16.25″ (412.75 mm) № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm)
    Horn Flare	5″ (127 mm)
    Air Source Unit	HornBlasters 228H air source unit
    Air Source Length	19″ (482.6 mm)
    Air Source Width	6.25″ (158.75 mm)
    Air Source Height	14.5″ (368.3 mm)
    Air Source Weight	17.15 lb (7.78 Kg)
    Air Tank	2.0 gallon
    Volume	2 gal (8.8 L)
    Max Amperage	25 amps
    Maximum Duty Cycle	30% @ 100 PSI

    2.0 GALLON TANK	FILL RATE
    0 to 145 PSI	3 min. 5 sec.(± 10 sec.)
    110 to 145 PSI	55 sec. (± 05 sec.)

    * Supply voltage: 13.8 volts