Flashark Cold Air Intake for 2010-2014 VW Golf Jetta Passat 2.0 TDI
Flashark Cold Air Intake for 2010-2014 VW Golf Jetta Passat 2.0 TDI est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Care information
Care information
Display general product information or specific product information using metafields.
Delivery and Shipping
Delivery and Shipping
Add some general information about your delivery and shipping policies.
Flashark Cold Air Intake for 2010-2014 VW Golf Jetta Passat 2.0 TDI
Flashark Cold Air Intake for 2010-2014 VW Golf Jetta Passat 2.0 TDI est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Highlight title
Text to highlight a key feature of your product
Description
Description
Flashark solved that. The 2.75" (70mm) mandrel-bent T-6061 aluminum tube was specifically sized for the 2.0 TDI's airflow requirements — not an off-the-shelf pipe with an adapter. Dual steel heat shields isolate the filter from the engine bay, so the turbo pulls cooler, denser air. And the dry filter needs no oil, which means zero risk of contaminating your $300 MAF sensor.
The result: faster turbo spool, sharper throttle response in the 1,800–3,000 RPM band where the TDI lives, and a deeper turbo whistle under load without drone at cruise. No CEL, no tune, no idle surging. Install is about 45 minutes with basic hand tools.
Key Features
- 2.75" (70mm) mandrel-bent T-6061 aluminum intake tube — black powder-coated, smooth interior walls; diameter specifically matched to the 2.0 TDI CJAA airflow profile for optimal velocity
- Dry cone filter (red) — washable, reusable, no oil required; 100% safe for the sensitive CJAA MAF sensor; clean every 15,000–20,000 miles
- Dual steel heat shields — two-piece design isolates filter from engine bay heat; routes intake to cold air zone; intake temp reduction improves combustion density
- Precision MAF calibration — CNC-machined 70mm housing delivers clean laminar airflow; no CEL, no idle surging, no hesitation at any RPM
- Straight + reducer silicone couplers — custom φ70 straight coupler + φ70→76 reducer; multi-layer black silicone with stainless clamps for a leak-free seal
- No tune required — plug-and-play with factory CJAA ECU; fuel trims adapt automatically, no VCDS coding needed
- Bolt-on installation — factory mounting points, no cutting or drilling; ~45 minutes with a T25/T30 Torx and basic socket set
Specifications
| Spec | Detail |
|---|---|
| Brand | Flashark |
| SKU | FLIS25125 |
| System Type | Cold Air Intake (CAI) |
| Engine Compatibility | 2.0L TDI Common-Rail Diesel (CJAA) |
| Tube Material | T-6061 Aluminum |
| Tube Finish | Black Powder Coated |
| Tube Diameter | 70mm (2.75") |
| Heat Shield | Dual steel plates (two-piece design) |
| Filter Type | Dry, washable, reusable (no oil required) |
| Filter Color | Red conical |
| Silicone Couplers | 1× straight φ70 + 1× reducer φ70→76 |
| Intake Hose | φ6 × 135mm with double-ended connector |
| Mounting Bracket | Steel, included |
| Grommets | 2× φ14 eyelets |
| Clamps | 3× narrow band (59–82mm) + 1× (72–95mm) |
| Tune Required | No — fully compatible with factory CJAA ECU |
| Install Time | ~45 minutes |
| Warranty | 1 Year |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product features
Use this section to highlight specific product features to your customers.
Product comparison grid
Add content here to explain a bit about the range of products on offer and which ones may be most suitable for your customers.
