KRYPTONITE TIE RODS (FOR SS SERIES CENTERLINK) 2011-2026 GMC/Chevy 2500/3500

Fits:

2011-2026 Chevy 2500/3500 

2011-2026 Chevy 2500/3500 

Important Fitment Details:

This kit is a complete tie rod replacement for trucks equipped with the Kryptonite SS Series Centerlink. These will NOT work with OEM centerlinks.

Features:

• Heat treated chromoly nickel outer studs.
• Bulletproof, all steel inner ball sockets. 
• Solid 1 1/4" Hexagon steel body.
• Left and Right hand jam nuts for the ultimate adjust ability.

Description:

Tie Rod Bodies come Powder Coated black and laser engraved.

Disclaimer: This product will not work with fabtech lift kits due to their proprietary spindle design that utilizes their outer tie rod. See the correct tie rods for that application here; KRYPTONITE DEATH GRIP TIE RODS 2011-2019 (FOR FABTECH RTS LIFT KITS)

Attention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required. Replacement end links available here.

When running a McGaughys lift you may need to modify or remove the lower bump stop bracket for clearance. 

Engineered exclusively for the extreme demands of today's heavy duty truck.  Built with pride in the USA to work with stock or modified suspension. Kryptonite tie rods will fit any 2011- Current 2500/3500 GM HD Truck that has the center link mounted in the factory location. Using superior components and engineering, these tie rods easily outperform the competition. This pair is for use with your factory center link.

These Tie Rods can easily be upgraded later to pair with our SS Series Center Link.

CLICK HERE TO SEE CENTER LINK UPGRADE KIT

In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite Death Grip tie rods. The OEM tie rods fail at 9000 pounds of pressure.  The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite Death Grip tie rods held up to an incredible 21000 pounds of pressure before pulling apart.

All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)

Instructions:

CLICK HERE FOR COMPLETE INSTALLATION INSTRUCTIONS

Warranty:

(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it—we don’t care. If you can break it, we’ll replace it.

Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].