Description

Don't limit your engine's power output potential with a restrictive OEM intake! The all-new EVP XR Series High Flow Intake (HFI) Kit for Can Am Maverick X3 turbo (all models except XMR) solves the inherent issues with the OEM intake system by delivering smooth, undisturbed airflow to the turbocharger and increasing airflow which translates into MORE power—particularly for big turbo and/or tuned ECU applications! Gain upwards of 15 HP when paired with EVP DS-355 (or higher) turbo systems, or a solid 5-10 HP on stock turbo applications.

Additionally, the XR Series HFI kits eliminate unnecessary clutter and weight by replacing the OEM airbox and tray for a more aggressive, race-ready setup that also significantly eases plug changes and other maintenance tasks.

Turbochargers are most efficient when the air entering the inlet has the least amount of restriction as possible. The OEM airbox, due to its canister design, is not only restrictive, but the air entering the compressor section of the turbo is turbulent. These two factors limit the power the engine can make, particularly on big turbo/high-horsepower vehicles. EVP's new proprietary XR Series HFI design is offered in three kits tailored specifically for Stock turbochargers, EVP Paragon or Dynomite turbo systems, and EVP Desert Storm turbo systems. All kits include a low-restriction/high-flow filter element, EVP pre-filter, smooth silicone elbow tubes with gradual diameter taper for greater airflow efficiency, plus mounting bracket and hardware. The free-flowing design supplies smooth, uninhibited airflow to the turbocharger inlet—which means MORE POWER!

Please note that to properly mount and install all XR Series HFI Kits, the following EVP parts are required:

• EVP X3 Bed Delete Kit
• EVP X3 Intercooler Tip-Up Bracket
• EVP X3 High-Volume Coolant Reservoir Tank
• EVP X3 High-Volume Coolant Relocation Brackets
• EVP X3 Scatter Shield (or aftermarket)

XR SERIES HFI FEATURES:

• Three unique kits available for Stock Turbo, EVP Paragon or Dynomite Turbo Systems, and EVP Desert Storm Turbo Systems
• Provides uninterrupted airflow to the turbo inlet for significantly enhanced power
• Eliminates clutter by replacing the OEM airbox, CVT ducts/housing, and airbox tray, making plug changes and other maintenance hassle-free
• Includes EVP HFI Filter and Pre-Filter

ALL XR SERIES HFI KITS INCLUDE:

• EVP HFI Air Filter w/ Pre-Filter
• XR Series HFI Mounting Bracket
• Silicone Hose Connector
• Full hardware installation kit

FITMENT

2017+ Can-Am Maverick X3 Models (EXCEPT XMR)

INSTRUCTIONS

EVP XR Series HFI Kit for X3

MAINTENANCE

• Air filter maintenance should be adjusted according to riding conditions
• Air filter maintenance must be increased in frequency when riding on snow, dry sand, dirt, gravel, or similar conditions that have a high dust or particle dispersion
  • Riding in a group in these conditions will require increasing the air filter maintenance frequency further.
• Inspect the filter for any signs of leaks. A streak of dust on the clean side of the filter is a telltale sign. Replace filter if there is any damages. Eliminate any source of air leaks before installing a new filter. Clean engine air filter by tapping out heavy dust from paper element, this will allow dirt and dust to get out of the paper filter.
• Purchase a replacement air filter if needed, available online HERE.