Admiral Train Horn Kit
BE HEARD AND NOT SEEN
You asked, we answered! The Stealth Spare Tire Delete kit is now available! After many hours of engineering and design, we've developed a train horn kit that not only fits more full size trucks and SUV's, but when installed has a lower profile than any other system before. With the bells tucked away, this new sleek configuration gives you the ability to be heard and not seen.
New features include:
- Multidirectional horn mounting pattern; sound projecting from both sides creates a 360-degree wall of sound.
- Fits more vehicles than before. New design allows for multiple mounting configurations.
- New component layout gives 5" of extra ground clearance compared to the previous Spare Tire Delete kit by moving the bells up into the spare tire well.
Important Notes:
-
Fits most full-size pickups and SUV's.
- The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
- This bracket is NOT compatible with the S6 mounting extensions. The additional bells must be mounted individually.
- Shocker XL train horns
- Stealth Spare tire delete bracket
- 2-gallon 6 port air tank
- HornBlasters 1/2" Black Widow electric air valve
- HornBlasters 3Q stealth black air compressor
- 110/150 PSI pressure switch w/ 40 amp relay
- Remote mountable intake filter assembly
- Spare air filter elements
- 12ft of 5/16" D.O.T. approved air line
- 2ft of 1/2" D.O.T. approved air line
- 6ft of 3/8" air line (for air compressors air intake)
- 22ft of 10-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- HornBlasters 200 PSI stainless steel liquid-filled air gauge
- Brass NPT fittings kit including a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Detailed instructions
| SPECIFICATION | |
|---|---|
| Part Number | HK-STEALTH |
| Operating Pressure | 150 PSI |
| Restart Pressure | 110 PSI |
| Voltage | 12-Volt DC |
| Max Amp Draw | 20-22 Amps |
| Horn | Shocker 4 train horn kit |
| Horn Material | High-impact fiberglass reinforced ABS |
| Horn Measurements | № 1 19.50″ (495.30 mm) № 2 16.25″ (412.75 mm) № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm) |
| Air Tank | HornAir 2-gallon 6 port air tank |
| Average Fill Time | 60-70 seconds |
| Air Flow | 1.41 CFM |
| Assembled Length | 27" (685.8 mm) |
| Assembled Width | 21" (533.4 mm) |
| Assembled Height | 8" (203.2 mm) |
| Assembled Weight | 50 lbs |
| 2.0 GALLON TANK | FILL RATE |
|---|---|
| 0 to 150 PSI | 3 min. 59 sec. (± 10 sec.) |
| 110 to 150 PSI | 1min. 33 sec. (± 05 sec.) |
* Supply Voltage: 13.8 Volts
-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
Our Shocker XL Train Horns are backed by our lifetime manufacturer's defect warranty and the rest of the components in this kit are backed by our Two-Year manufacturer's defect warranty. -
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
STEALTH WITH A SIDE OF EXTRA AIR
Command attention with the 5-Gallon Stealth Spare Tire Delete Train Horn Kit—your all-in-one solution for powerful, road-dominating sound. This complete kit is designed for seamless installation in your spare tire location, delivering the iconic train horn blast you expect with a sleek and discreet setup.
Featuring a 5-gallon air tank, this kit provides extended air capacity to keep your horns honking longer. Paired with our extremely popular Shocker XL train horns and 544K onboard air system, it’s perfect for making sure you're heard when it matters most.
- Complete Train Horn Kit: Includes everything you need—train horns, 5-gallon air tank, compressor, all mounting hardware, and more.
- Stealth Installation: Fits neatly in your spare tire location for a clean, low-profile look.
- Massive Air Capacity: The 5-gallon tank provides roughly 10-12 seconds of honk time and reliable performance.
- High-Performance Sound: Designed to deliver the powerful, authentic train horn tone you demand.
- Versatile Air System: Use it for honking, inflating tires, or powering small air tools.
Perfect for truck owners and enthusiasts who want unmatched sound and functionality, the 5-Gallon Stealth Spare Tire Delete Train Horn Kit delivers everything you need to make your presence known on the road.
Important Notes:
-
Fits most full-size pickups and SUV's.
- The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
- This bracket is NOT compatible with the S6 mounting extensions. The additional bells must be mounted individually.
- Shocker XL train horns
- Stealth Spare tire delete bracket
- 5-gallon 8 port air tank
- HornBlasters 1/2" Black Widow electric air valve
- HornBlasters 1NM stealth black air compressor
- 110/150 PSI pressure switch w/ 40 amp relay
- Remote mountable intake filter assembly
- Spare air filter elements
- 12ft of 5/16" D.O.T. approved air line
- 2ft of 1/2" D.O.T. approved air line
- 6ft of 3/8" air line (for air compressors air intake)
- 22ft of 10-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- HornBlasters 200 PSI stainless steel liquid-filled air gauge
- Brass NPT fittings kit including a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Detailed instructions
| SPECIFICATION | |||||
|---|---|---|---|---|---|
| Part Number | HK-STEALTH-5 | ||||
| Operating Pressure | 150 PSI | ||||
| Restart Pressure | 110 PSI | ||||
| Voltage | 12-Volt DC | ||||
| Max Amp Draw | 25 Amps | ||||
| Honk Time | 10-12 Seconds | ||||
| Horn | Shocker XL train horn | ||||
| Horn Material | High-impact fiberglass reinforced ABS | ||||
| Horn Measurements |
|
||||
| Air Tank | 5-gallon 8-port air tank | ||||
| Average Fill Time | 2 Minutes | ||||
| Air Flow | 1.41 CFM | ||||
| Assembled Length | 27" (685.8 mm) | ||||
| Assembled Width | 21" (533.4 mm) | ||||
| Assembled Height | 12" (304.8 mm) | ||||
| Assembled Weight | 57 lbs | ||||
| 5.0 GALLON TANK | FILL RATE |
|---|---|
| 0 to 150 PSI | 6 min. 45 sec. (± 10 sec.) |
| 110 to 150 PSI | 2 min. (± 05 sec.) |
* Supply Voltage: 13.8 Volts
-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
Our Shocker XL Train Horns are backed by our lifetime manufacturer's defect warranty and the rest of the components in this kit are backed by our Two-Year manufacturer's defect warranty. -
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
SET SAIL
Make a bold statement with the Admiral 228H Train Horn Kit. Impress with its stunning chrome finish and powerful 5-chime train horn sound. Ideal for the road or high seas, this kit is designed to command respect. The brass train horn is paired with the beginner-friendly HornAir 228H air source unit. It is pre-plumbed and pre-wired for easy installation and provides 2 gallons of air for up to 5 seconds of continuous honk time. Get the complete kit with all required components and detailed instructions.
-
Bold Aesthetics & Sound: The Admiral 228H boasts a lustrous chrome finish and delivers an authoritative 5-chime train horn blast, ensuring you stand out whether on land or sea.
- User-Friendly Installation: Pre-plumbed, pre-wired components and a pre-installed electric air valve make the setup of this kit hassle-free, even for beginners.
- Continuous Performance: Equipped with a 2-gallon air capacity, experience up to 5 seconds of uninterrupted, powerful honking.
- Complete Package: This all-inclusive train horn kit ensures you have every component needed for a seamless setup, complemented with detailed instructions.
- Sturdy & Resilient: Designed with a heavy-duty chrome finish, the Admiral is built for durability and to withstand various conditions.
(Note: Tank-mounted air compressors are not fully sealed. For this reason, the manufacturer recommends the tank/compressor system be mounted in the upright position in an enclosed space away from moisture, dirt, debris, etc... Failure to mount this product as directed will void the warranty)
**Detaching the compressor from the tank will void your warranty on this kit. If you need a solution where the compressor is detached, please look at our 232 and higher models. **
- Admiral chrome train horn
- HornBlasters 228H air source unit
- HORNBLASTERS 110/145 PSI PRESSURE SWITCH WITH LEADS
- Remote mountable intake filter assembly
- Spare air filter elements
- 10ft 1/2" D.O.T. Approved air line
- 6ft 3/8" air line (for intake)
- 22ft of 10-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- Pre-installed 3/8" electric air valve
- Brass NPT fitting kit with a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Detailed instructions
- Earplugs
- Part Number: HK-C5-228H
- Operating Pressure: 150 PSI
- Restart Pressure: 110 PSI
- Voltage: 12-Volt DC
- Horn: Admiral train horn
- Horn Air Inlet: 1/2" air line
- Horn Length: 17" (431.8 mm)
- Horn Width: 16" (406.4 mm)
- Horn Height: 15.5" (393.7 mm)
- Horn Weight: 19.8 lb (8.98 Kg)
- Air Source Unit: HornBlasters 228H air source unit
- Working Pressure: 150 PSI
- Air Source Length: 18.9″ (480.6 mm)
- Air Source Width: 5.9″ (149.86 mm)
- Air Source Height: 13.7″ (347.98 mm)
- Air Source Weight: 17.15 lb (7.78 Kg)
- Air Source Kit Tank: 2-gallon 5 port air tank
- Volume: 2 Gal (8.8 L)
- Air Source Kit Compressor: HB-2 air compressor
- Max Amperage: 19 amps
- Maximum Duty Cycle: 30% @ 100 PSI
| 2.0 GALLON TANK | FILL RATE |
|---|---|
| 0 to 145 PSI | 3 min. 40 sec.(± 10 sec.) |
| 110 to 145 PSI | 1 min. 15 sec. (± 05 sec.) |
* Supply Voltage: 13.8 Volts
-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
This product is backed by our 2-Year Manufacturer's Defect Warranty! -
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
ANCHORS AWEIGH
Make your presence known with the Admiral 544K train horn kit! With its impressive loudness, long blast time, and quick recharge rate, this kit is the perfect choice for anyone looking to make a statement on the road. The weather-resistant design ensures that this train horn can handle any condition you encounter on the highway.
The eye-catching chrome 5-chime Admiral train horn is not just a looker, but a true performer. Made from solid brass and covered in a shiny chrome finish, it's sure to turn heads before it even makes a sound. And once it does make a sound, you can be sure it will be heard from miles away thanks to the HornAir 544K onboard air system. This system provides up to 10 seconds of continuous blast time, as well as support for other onboard air needs like tire inflation and small air tool use.
-
Stunning & Resilient Design: Featuring a dazzling chrome 5-chime Admiral horn crafted from solid brass.
- Unparalleled Sound Intensity: Backed by the HornAir 544K onboard air system, the Admiral 544K guarantees your commanding presence is heard from miles away with up to 10 seconds of continuous honk times.
- Speedy & Efficient Performance: Equipped with the heavy-duty HB-1NM air compressor, experience rapid air refills and the versatility to power moderate pneumatic tasks.
- Multi-Functional Air System: Beyond the commanding honk, the kit supports diverse onboard air needs like tire inflation and the operation of small air tools.
- Complete Readiness: With an extra-large 5-gallon air tank and an accurate stainless liquid-filled air pressure gauge, the Admiral 544K is set to deliver unmatched reliability and performance.
- Admiral train horn
- 5-gallon 8 port air tank
-
Hornblasters hb-1nm air compressor
-
110/150 PSI pressure switch w/ 40 amp relay
- 17ft of 1/2" Air Line
- Remote mountable air filter housing
- Spare air filter elements
- Brass NPT fitting kit with a safety blow-off & drain cock
- HornBlasters 200 PSI stainless steel fiquid-filled air gauge
- 22ft of 8-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
-
Complete wiring kit with fuse holder & fuses
- Air line cutter
- Earplugs
- Compressor mounting hardware
- Installation instructions
| Part Number | HK-C5-544K |
| Operating Pressure | 150 PSI |
| Restart Pressure | 110 PSI |
| Voltage | 12-Volt DC |
| Horn | Admiral train horn |
| Horn Air Inlet | 1/2" air line |
| Horn Length | 17" (431.8 mm) |
| Horn Width | 16" (406.4 mm) |
| Horn Height | 15.5" (393.7 mm) |
| Horn Weight | 19.8 lb (8.98 Kg) |
| Air Tank | HornAir 5-gallon 8 port air tank |
| Tank Length | 20.5″ (520.7 mm) |
| Tank Diameter | 9.5″ (241.3 mm) |
| Tank Height | 11.5″ (292.1 mm) (With Legs) |
| Tank Weight | 20 lb (9.07 Kg) |
| Tank Ports | x7 1/2" NPT, x1 3/4" NPT |
| Average Fill Time | 1 Min 30 Sec |
| Max amperage | 25 Amps |
| Maximum duty cycle | 100% @ 100 PSI |
| Flow Rate @ 0 PSI | 1.75 CFM |
| Compressor length | 10.75″ (273.05 mm) |
| Compressor width | 4″ (101.6 mm) |
| Compressor height | 6.75″ (171.45 mm) |
| 5.0 GALLON TANK | FILL RATE |
|---|---|
| 0 to 150 PSI | 6 min. 45 sec. (± 10 sec.) |
| 110 to 150 PSI | 2 min. (± 05 sec.) |
5-Gallon Air Tank Dimensional Drawing

-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
This product is backed by our 2-Year Manufacturer's Defect Warranty! -
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.