zzperformance

This is a genuine brand new ACDelco GM stock 2012-2013 Buick Regal 2.0L Ecotec throttle body.This will not fit the 2011 Buick Regal or an LNF 2.0L ...

A noncorrosive, sensor-safe RTV silicone gasket material formulated specifically for water pumps and thermostat housings. Highest water-glycol resi...

This is a universal weld in/on bung made of 6061-T6 aluminum. This fitting has a large hex head and is a 1/2" NPT female fitting. Can be used in fa...

This is a complete kit with everything needed to install "LNF" Brembo brakes on your LSJ. The kit comes with a special wheel bearing spacer to corr...

2025 Note: While the 160# injectors can and do work, we highly recommend the Injector Dynamics 1050 injectors if you are needing an upgraded inject...

This should be used when adding boost to your naturally aspirated engine for proper tuning. This is a 2 bar MAP sensor that will directly replace y...

This is a new aftermarket OEM replacement flywheel. This is great if you are doing a clutch install and would rather swap flywheels than wait while...

 OEM 2.2 replacement head gasket.  No special sprays needed for the OEM gasket.  

This is the absolute perfect clutch upgrade for your 2.2 or 2.4 liter. We start with a custom aluminum flywheel that has a bolt pattern for your 6 ...

New GM cylinder head to exhaust manifold gasket for 2.2 and 2.4 Ecotec engines.

This is a refurbished LSJ intake manifold for our 2.2/2.4 supercharger kit. We start with a used OEM intake manifold, break it down to the core, ul...

Its time to get rid of those stock OEM axles that have the shaft machined to break under stress. Its time to not be afraid of breaking your axles o...

This is a complete set of rings for your LE5 with stock bore size pistons (88mm). These rings are intended for stock pistons. 

This is a 2.5" exhaust gasket. Typically used to mate the stock downpipe to the stock catback.

PERMATEX® Sensor-Safe High-Temp RTV Silicone Gasket Maker 27B. Formulated for oxygen sensor equipped engines. Temperatures range from -75°F to 650°...

New redesigned gasket that is reinforced on the inlet hole to prevent premature failures. 3 inch 2 bolt exhaust gasket (with 5.5" bolt spacing)....

NA applications: This should be used when adding boost to your naturally aspirated engine or when your boost levels are above your factory MAP sens...

This is a universal barbed oil drain flange. For use in a DIY turbo system or replacement for our 3800 or LSJ turbo kits.

The ZZP 50mm Blow Off Valve (of BOV) kit includes a high-quality billet aluminum blow off valve, weld-on flange(if selected), v-band clamp, and fit...

Did you lose or damage your 50mm blow off valve o-ring gasket? This is a replacement for the ZZP or TiAl 50mm blow off valve.

Stock replacement spark plug for the 2.0L LNF Cobalt, HHR SS, Saturn Sky Redline, and Pontiac Solstice GXP. Come pre-gapped. Also fits LHU and LDK ...

This is an OEM filter, it comes without a cap, the stock one is reuseable. It fits the following engines: LNF, LE5, LSJ, LAP, L61, LHU, LDK, and po...

This is an OEM filter, it comes with a new cap. It fits the following engines: LNF, LE5, LSJ, LAP, L61, LHU, LDK, and possibly more.

Advantage - All-Season Metal Blades  All-metal blade construction for durability.  Precisely fitted wiper elements for a smoother and quieter oper...