zzperformance

This is an OEM AC Delco head gasket kit for your LF4 or LF3 powered vehicle. This is a full head gasket service kit that includes both head gaskets...

GM ACDelco valve cover and spark plug grommet set for 11+ 2.0L Regal/Verano LHU, and LDK.

Brand new takeoff OEM LDK/LHU head with valves/springs/retainers. Does not include cams, lifters, rockers. If you buy 82# springs and/or cams/lifte...

This is a new OEM take off vacuum pump for your Buick Regal, Opel Astra, Insignia.

These are the factory replacement radiator hoses and T fitting. The LNF comes with a single upper radiator hose and two lowers which are connected ...

This is the gasket that seals the downpipe exit to catback section on 2008-2010 Cobalt SS 2.0 and 2008-2010 HHR SS 2.0.

Gasket for head to exhaust manifold. Also fits LHU/LDK. 

Brand new OEM LNF cylinder head that comes assembled with new factory valves/springs/retainers. It does not include cams, lash adjusters, or rocker...

This is a ZZP replacement intake manifold gasket for 2.0L LNF. This gasket goes between the intake manifold and the head.    Fits: 2008-2010 Chevy ...

This is a replacement ring set for the stock OEM piston stock bore 07+ LNF/LHU/LDK 2.0 liter direct injection engine. A piston ring must have both ...

Connects both the LNF turbo to the o2 housing and the o2 housing to the downpipe.

Premium Valve cover and Spark plug grommet set for 08+ 2.0L LNF

This is a brand new OEM fuel feed line for your LNF/LDK/LHU. Replace your old weathered fuel feed line with a brand new one for a third of the cost...

Fits the following 2.0 models: BUICK REGAL 2011-2013 BUICK VERANO 2013-2016 CHEVROLET COBALT 2008-2010 CHEVROLET HHR 2008-2010 PONTIAC ...

This is an OEM replacement sensor for your LNF/LDK/LHU car. There are 2 vacuum/boost solenoids on the LNF, one on the intake manifold, and one on t...

Installing this cam with a larger fuel pump lobe does several things:1. Increases available fuel by 20%. This gives you potential to make 20% more...

These rubber O-rings sit on top of the lower intake manifold and seal off the coolant passages into the supercharger.   Sold as a pair.

This is the popular "LQ4" Mass Air Flow Sensor. It is most commonly used in the Northstar throttle body conversion kit. It is popular because its r...

This is an "LS" style valve spring retainers that are machined to give you more retainer to valve seal clearance. You can reuse your stock valve lo...

Make sure to select the correct coupler for your intake. We offer a straight and a 45° coupler. Verify what coupler you have before purchasing. For...

This is a replacement bypass valve for your LSA supercharger. Direct bolt in, no modification needed. Fits:  2009-15 Cadillac CTS-V 2012-15 Chevy ...

This is our stainless steel hub that will allow you to simply unbolt your supercharger pulley and run a smaller or larger pulley within minutes. Th...

This is our Modular Pulley System that will allow you to simply unbolt your supercharger pulley and run a smaller or larger pulley within minutes. ...

These are the interchangable pulleys themselves from our LSA Modular Pulley System. They are not interchangable with any other pulley hubs that we ...