Produits

1.25 Loaded Right Handed Rod End This is a SINGLE - 1 1/4" Heat Treated Chromoly Rod End with all the trimmings! You get 1 1/4" Heims with a 1" thr...

This is it, a pair of FFS 1.25” Heat Treated Chromoly Rod Ends with all the trimmings! You get two 1.25" Heims with a 1" through bore, 4 zinc plate...

1.25" JAM NUT 12(TPI) 1.25"- 12 tpi Zinc Plated Left/Right Hand thread Jam nut for our 1.25" right hand heims NOTE: SOLD INDIVIDUALLY

Here at Geiser Performance we have a large variety of Billet and Plate components that we manufacture for our parts. We also know that there are pl...

Vehicle: 5 x 5.5" (139.7mm)Wheel: 5 x 5.5" (139.7mm)1.50" Thick14mm 1.50 studs77.8mm Hub Bore77.8mm Wheel BoreIncludes: 14mm 1.50 open end lug nuts...

1.25" ROD END LEFT HAND 12(TPI) This is a fully heat treated chromoly heim with a radial static load(RSL) rating of 76,200 lbs. The 52100 bearing i...

1.25" ROD END RIGHT HAND 12(TPI)   This is a fully heat treated chromoly heim with a radial static load(RSL) rating of 76,200 lbs. The 52100 bearin...

Qty(2) 1.25" Rod End Set 12(TPI)  Rod ends without misalignments and tube adapters  Unloaded rod ends 

1.25" Standard Tube Adapter — Left Hand, 1.50" ID, 12 TPI — Weld-in threaded bung for link-suspension builds. Desig...

1.25" Standard Tube Adapter — Right Hand, 1.50" ID, 12 TPI — Weld-in threaded bung for link-suspension builds. Designed so most of the heim sh...

1.3" Multi-Mount PEI Mini Dome Tweeter with 0.8" Voice Coil Boost your system’s clarity with the SQT1, the epitome of high-frequency clarity and ve...

1.3" Multi-Mount PEI Mini Dome Tweeter with 0.8" Voice Coil Boost your system’s clarity with the SQT1, the epitome of high-frequency clarity and ve...

These are the cam phaser bolts needed to do timing on your 1.4 LUV/LUJ. You will need 2 bolts (one for each cam) when doing the timing on your engi...

These are the cam phaser bolts needed to do timing on your 1.4 Volt or ELR. You will need 2 bolts (one for each cam) when doing the timing on your ...

This is an OEM gasket for your 1.4T coolant outlet housing that is located on the driver side of the block. Fits the OEM plastic housing or our upg...

This is an OEM GM replacement lower radiator hose for your 1.4L Chevy Cruze. Fits 2011-2016 1.4L Chevy Cruze, also fits 2016 Chevy Cruze Limited (2...

This is an OEM GM replacement upper radiator hose for your 1.4L Chevy Cruze. Fits 2011-2016 1.4L Chevy Cruze, also fits 2016 Chevy Cruze Limited (2...

OEM GM exhaust manifold gasket for 1.4 LUV/LUJ/LUH.

This is an OE style replacement head gasket for your 1.4T LUV/LUJ powered vehicle. Follow factory manual replacement procedure when installing.  ...

This is a full set of 10 OEM main bearing cap bolts for your 1.4T engine. These bolts are torque to yield, so if you are rebuilding your engine you...

This is a full set of 12 OEM main bearing cap tie plate bolts for your 1.4T engine. These bolts are torque to yield, so if you are rebuild...

This product is for customers that have already purchased our ZZP 1.0 pcm for your 1.4 turbo car (Sonic, Cruze, Trax, Vanderhall, etc) and need a b...

This is an OE style oil drain tube from the turbo to the block on your 1.4 LUV/LUJ/LUH. These become frail and crack/snap and you will typically wa...

This is an upgraded, all metal, oil drain (or return) hose for your 1.4T powered vehicle. The stock drain tube is made of plastic which gets brittl...