{"product_id":"sony-mobile-es-xm-1es","title":"Sony Mobile ES amplifier XM-1ES","description":"\u003cp\u003e\u003cstrong\u003eSony Mobile ES amplifier XM-1ES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCTA-2006 Compliant:\u003c\/strong\u003e CTA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring amplifier power uses a DC input voltage of 14.4 volts and the RMS power output is measured over a frequency range of 20 Hz to 20 kHz (for full range amplifiers), with 1% or less Total Harmonic Distortion plus noise (THD+N). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4-ohms. CTA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCTA-2006 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Output:\u003c\/strong\u003e 600 watts RMS x 1 into 4-ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal to Noise Ratio:\u003c\/strong\u003e 77 dBA (measured at 1 watt into 4-ohms)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Output:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-ohm:\u003c\/strong\u003e 1,000 watts RMS x 1 (14.4 volts, =1.0% THD+N)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal to Noise Ratio:\u003c\/strong\u003e 100 dB (at rated power output, 4-ohms)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAmp Overview:\u003c\/strong\u003e The Sony XM-1ES is a Class D mono subwoofer amplifier. Its Class D design and aluminum chassis offer efficient dissipation of heat for reliable performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpeaker-Level Inputs:\u003c\/strong\u003e The RCA inputs will accept either speaker-level or line-level signals from your car's head unit. A speaker-level signal is connected to the RCA inputs using a \u003ca href=\"https:\/\/www.crutchfield.com\/g_481250\/Speaker-Wire-to-RCA-Adapters.html?tp=88134\" rel=\"noopener noreferrer\" target=\"_blank\"\u003espeaker wire to RCA adapter\u003c\/a\u003e (sold separately).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAuto Turn-on:\u003c\/strong\u003e When using a speaker-level input, the amp will turn on automatically when it senses the input signal from most head units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtection Circuits:\u003c\/strong\u003e The amplifier is equipped with protection circuits and turns off in the case of speaker short circuit, thermal overload, or DC output.\u003c\/p\u003e\n\u003ch5\u003e\n\u003ca name=\"Controls\"\u003e\u003c\/a\u003eControls\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTurn-on:\u003c\/strong\u003e 2-position switch:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote:\u003c\/strong\u003e amp turns on when a +12 volt signal is applied to the remote terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal:\u003c\/strong\u003e amp turns on when it senses a speaker-level input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 2-position switch:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow:\u003c\/strong\u003e input sensitivity range is 200mV to 8V; used for preamp-level inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh:\u003c\/strong\u003e input sensitivity range is 3V to 16V; used for speaker-level inputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInput Sensitivity (Gain):\u003c\/strong\u003e Input sensitivity is adjusted with rotary a dial; the range depends on the input voltage switch setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Mode:\u003c\/strong\u003e 2-position switch:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:\u003c\/strong\u003e uses only input 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1+2:\u003c\/strong\u003e inputs 1 and 2 are combined and the summed signal feeds the amplifier stage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLine Out Mode:\u003c\/strong\u003e 2-position switch:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThru:\u003c\/strong\u003e inputs 1 and 2 feed line outputs 1 and 2 respectively\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll:\u003c\/strong\u003e both inputs are combined and the summed signal feeds both line outputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCrossover:\u003c\/strong\u003e The amp features a 24dB per octave low-pass crossover. The crossover point is continuously variable from 50 to 500 Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubsonic Filter:\u003c\/strong\u003e There is also a 24dB per octave subsonic filter to remove frequencies your sub can't reproduce. The cutoff frequency is continuously variable from 5 to 50 Hz, and the subsonic filter can be turned off if you prefer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemote Control:\u003c\/strong\u003e The included wired remote control lets you control the output level from the driver's seat. The small control module can be mounted on the console or dash with the supplied bracket and screws. The remote measures approximately 1-1\/8\" in diameter and 1-3\/8\" tall.\u003c\/p\u003e\n\u003ch5\u003e\n\u003ca name=\"Connections\"\u003e\u003c\/a\u003eConnections\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePower Input:\u003c\/strong\u003e Set-screw terminals are provided for connecting the power and ground cables. The terminals accept up to 4-gauge wire (4-gauge minimum recommended). The set screws are tightened\/loosened with the included 2.5mm Allen wrench.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemote Turn-on:\u003c\/strong\u003e The remote turn-on set screw terminal will accept up to 8-gauge wire. The set screw is tightened\/loosened with the included 2.5mm Allen wrench.\u003c\/p\u003e\n\u003cdiv class=\"research-note\"\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e The remote turn-on is usually not needed when a speaker-level input is used. The Auto Turn-on circuit will automatically turn the amp on when a signal is detected (and turn the amp off when the input signal is no longer detected).\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSpeaker Outputs:\u003c\/strong\u003e There are two pair of speaker outputs internally shorted together, making it easy to connect two subwoofers wired in parallel. These set screw terminals accept up to 8-gauge wire and are tightened\/loosened with the included 2.5mm Allen wrench.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Input:\u003c\/strong\u003e The amplifier has one pair of stereo RCA inputs. If no line-level signal is available, you will needSpeaker wire to RCA adapters.(sold separately) to connect the amplifier to the source unit via speaker wires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Outputs:\u003c\/strong\u003e There is one pair of RCA preamp outputs, useful for adding another amp without running another set of cables. The preamp outputs are not affected by the crossovers or input sensitivity setting on this amp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuses:\u003c\/strong\u003e The amp has four 25-amp ATO fuses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemote:\u003c\/strong\u003e The included wired remote plugs into the RJ-14 jack.\u003c\/p\u003e","brand":"Platinum High Performance Solutions, LLC.","offers":[{"title":"Default Title","offer_id":49066505142558,"sku":"","price":565.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/7171\/1262\/files\/XM1ES_2-Z.jpg?v=1733546579","url":"https:\/\/platinumhpsolutions.myshopify.com\/products\/sony-mobile-es-xm-1es","provider":"Platinum High Performance Solutions, LLC.","version":"1.0","type":"link"}