{"product_id":"obs-7-3l-driven-diesel-overboost-annihilator","title":"Driven Diesel Overboost Annihilator - 1999-2003 Ford F-Series","description":"\u003ch3\u003eOBS 7.3L Driven Diesel Overboost Annihilator\u003c\/h3\u003e\n\u003cp\u003eEliminate overboost-related defueling and keep full power on your tuned 7.3L Powerstroke with the \u003cstrong\u003eDriven Diesel Overboost Annihilator\u003c\/strong\u003e. This mechanical boost control solution prevents the PCM from triggering the \u003cem\u003eService Engine Soon\u003c\/em\u003e light and pulling fuel when boost exceeds factory limits—a common issue on modified trucks running chips, tuners, or modules.\u003c\/p\u003e\n\u003cp\u003eInstead of interfering with electronics, this kit limits what the \u003cstrong\u003eMAP sensor sees\u003c\/strong\u003e, while still allowing the engine to make full boost.\u003c\/p\u003e\n\u003cp\u003e🔥 \u003cstrong\u003eWhat It Fixes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn 1999–2003 7.3L Powerstrokes, the PCM typically triggers an SES light and defueling at ~24 PSI of boost (sometimes lower depending on calibration). Once triggered, reduced power remains until the fault clears.\u003c\/p\u003e\n\u003cp\u003eThe Overboost Annihilator prevents this \u003cstrong\u003efor overboost conditions only\u003c\/strong\u003e, allowing uninterrupted power at higher boost levels.\u003c\/p\u003e\n\u003cp\u003e🔧 \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-Assembled \u0026amp; Pre-Set\u003c\/strong\u003e –\u003cbr\u003eReady to install with no tuning or adjustment required\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Pressure Regulation\u003c\/strong\u003e –\u003cbr\u003eLimits MAP sensor input to ~22–23 PSI while allowing full actual boost\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Electronic Interference\u003c\/strong\u003e –\u003cbr\u003ePCM and MAP sensor retain normal operation with no drivability issues\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Quality Components\u003c\/strong\u003e –\u003cbr\u003e• Adjustable pressure regulator\u003cbr\u003e• Pre-installed mounting bracket\u003cbr\u003e• Parker Push-Lok fittings\u003cbr\u003e• Goodyear hose\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccurate Readings Where It Matters\u003c\/strong\u003e –\u003cbr\u003e• 100% accurate MAP readings up to preset limit\u003cbr\u003e• 100% accurate \u003cem\u003emechanical\u003c\/em\u003e boost gauge readings\u003cbr\u003e• \u003cstrong\u003eNo loss of actual boost pressure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• This kit ONLY addresses \u003cstrong\u003eoverboost-related SES codes\u003c\/strong\u003e\u003cbr\u003e• Common overboost codes include \u003cstrong\u003eP1249\u003c\/strong\u003e and \u003cstrong\u003eP0238\u003c\/strong\u003e\u003cbr\u003e• Other codes (such as \u003cstrong\u003eP1211 Injection Pressure\u003c\/strong\u003e) can occur at similar boost levels and will NOT be fixed by this kit\u003c\/p\u003e\n\u003cp\u003e👉 \u003cstrong\u003eAlways scan your truck before ordering\u003c\/strong\u003e to confirm the issue is truly overboost-related.\u003c\/p\u003e\n\u003cp\u003e📊 \u003cstrong\u003eGauge Compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Mechanical boost gauges: ✔️ Fully accurate\u003cbr\u003e• Electronic monitors reading from MAP sensor: ❌ Will cap at preset max (22–23 PSI)\u003c\/p\u003e\n\u003cp\u003e🚨 \u003cstrong\u003eWarnings \u0026amp; Fitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Designed to allow boost levels above Ford’s factory “safe” limits\u003cbr\u003e• Running elevated boost on a stock turbo may reduce turbocharger lifespan\u003cbr\u003e• Use at your own risk\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e94–97 OBS Trucks:\u003c\/strong\u003e\u003cbr\u003e• Earlier trucks typically do not require this kit as often\u003cbr\u003e• This kit is \u003cstrong\u003eNOT a direct bolt-on\u003c\/strong\u003e for 94–97 trucks\u003cbr\u003e• Some modification may be required\u003cbr\u003e• Strongly recommended to verify overboost codes before purchase\u003c\/p\u003e\n\u003cp\u003e🛠️ \u003cstrong\u003eWhy Choose the Overboost Annihilator?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike cheap electronic “fixes” that can hurt drivability, this is a \u003cstrong\u003epurely mechanical solution\u003c\/strong\u003e to a mechanical problem. It preserves factory sensor behavior, avoids electronic manipulation, and delivers consistent, reliable performance for modified 7.3L Powerstrokes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e DD-73L-OBA\u003c\/p\u003e","brand":"Driven Diesel","offers":[{"title":"Default Title","offer_id":50436093706526,"sku":"DD-73L-OBA","price":157.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/7171\/1262\/files\/2677__11013_9944983c-458c-468a-87a0-41a4650c98b7.jpg?v=1780368801","url":"https:\/\/platinumhpsolutions.myshopify.com\/products\/obs-7-3l-driven-diesel-overboost-annihilator","provider":"Platinum High Performance Solutions, LLC.","version":"1.0","type":"link"}