{"product_id":"cold-air-intake-for-1997-2006-jeep-wrangler-tj","title":"Cold Air Intake for  1997-2006 Jeep Wrangler TJ 2.5L \u0026 2.4L","description":"\u003cp\u003eThe 2.5L AMC and 2.4L PowerTech four-cylinders in the TJ Wrangler are torque-focused engines designed for crawling, not highway speed. The factory airbox — with its restrictive snorkel, baffled resonator chambers, and corrugated rubber intake hose — was engineered for noise compliance, not airflow. On the highway or with larger tires, that restriction becomes a real liability.\u003c\/p\u003e\n\n\u003cp\u003eFlashark's intake kit replaces the entire factory assembly with a 3-inch (Φ76 mm) thermally wrapped aluminum intake tube and a high-flow dry-cotton conical filter. The thermal wrap is the key differentiator here: unlike bare-metal pipes that absorb radiant heat from the exhaust manifold, the wrapped tube actively rejects engine-bay heat, keeping intake air cooler where it matters most — in the tube itself.\u003c\/p\u003e\n\u003cp\u003eInstallation uses the TJ's factory airbox mounting points, no cutting or welding required. You get improved throttle response, a deeper induction note that actually sounds like a real engine, and a cleaner engine bay — all bolt-on and reversible in under an hour.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3\" Thermal-Wrapped Aluminum Intake Tube\u003c\/strong\u003e — Mandrel-bent aluminum pipe with integrated thermal insulation wrap that rejects radiant heat from the exhaust side. Not just a painted pipe — the wrap layer actively keeps intake air cooler than bare metal alternatives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Flow Dry Cotton Conical Filter\u003c\/strong\u003e — Red cotton gauze cone: 120 mm steel top cap \/ 180 mm PU base \/ 76 mm inlet with dedicated clamp. Washable and reusable — no oil required, ever.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Silicone Reducer Coupler\u003c\/strong\u003e — Φ63 × Φ76 mm reducer transitions smoothly from the 3\" intake tube to the factory throttle body inlet, eliminating the step-change turbulence of the stock rubber accordion hose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirect-Fit CCV Breather Line\u003c\/strong\u003e — Reinforced D19-d13 × 175 mm breather hose with Φ10 mm brass nipple, connects directly to factory PCV\/CCV plumbing on both 2.5L AMC and 2.4L PowerTech engines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Bolt-On Hardware Kit\u003c\/strong\u003e — Aluminum bracket with brass-sleeved M6 anchor bolt, anti-vibration foam strip (560 mm), 2× narrow-band stainless steel clamps (84×108 mm), and full M6 washers and nuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Trim, No-Weld Installation\u003c\/strong\u003e — Uses factory airbox mounting points. Installation is fully reversible in 45-60 minutes with basic hand tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Check Engine Light\u003c\/strong\u003e — Maintains correct MAF\/IAT sensor positioning and factory breather routing on both naturally aspirated 2.5L and 2.4L applications. No tune required on compatible engines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtective Plastic Shield Included\u003c\/strong\u003e — Adds a layer of splash and debris protection for the filter, a practical inclusion for a vehicle that sees off-road use.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Type\u003c\/strong\u003e: Dry cotton gauze\u003cbr\u003e\u003cstrong\u003ePipe Material\u003c\/strong\u003e: Heat-insulated aluminum piping\u003cbr\u003e\u003cstrong\u003eMain Tube Diameter\u003c\/strong\u003e: Φ76 mm (3 inches)\u003cbr\u003e\u003cstrong\u003eReducer Coupler\u003c\/strong\u003e: Φ63 × Φ76 mm silicone\u003cbr\u003e\u003cstrong\u003eClamps\u003c\/strong\u003e: 8× narrow-band stainless steel 84×108 mm\u003cbr\u003e\u003cstrong\u003eAnti-Vibration Strip\u003c\/strong\u003e: 1× foam, 560 mm\u003cbr\u003e\u003cstrong\u003eProtective Shield:\u003c\/strong\u003e 1× plastic filter shield\u003cbr\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: Approximately 2.9 kg\u003cbr\u003e\u003cstrong\u003eEstimated Install Time\u003c\/strong\u003e: 45–60 minutes\u003c\/p\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cp\u003e1× 3-Inch Thermal-Wrapped Aluminum Intake Tube\u003cbr\u003e1× High-Flow Red Dry Cotton Conical Filter (120\/180\/76 mm)\u003cbr\u003e1× Φ63 × Φ76 mm Silicone Reducer Coupler\u003cbr\u003e1× Reinforced Breather Hose (D19-d13 × 175 mm)\u003cbr\u003e1× Φ10 mm Brass Breather Nipple\u003cbr\u003e8× Narrow-Band Stainless Steel Clamps (84×108 mm)\u003cbr\u003e1× Aluminum Mounting Bracket with Brass-Sleeved M6 Anchor Bolt\u003cbr\u003e1× Anti-Vibration Foam Strip (560 mm)\u003cbr\u003e1× Plastic Filter Protective Shield\u003cbr\u003e1× Complete M6 Fastener Set (washers and nuts)\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0293\/4423\/5619\/files\/Cold_Air_Intake_for_1997-2006_Jeep_Wrangler_TJ_1.jpg?v=1745376319\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Flashark","offers":[{"title":"Default Title","offer_id":51797436629278,"sku":"FLIS25093","price":145.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/7171\/1262\/files\/IS25093.webp?v=1782569244","url":"https:\/\/platinumhpsolutions.myshopify.com\/products\/cold-air-intake-for-1997-2006-jeep-wrangler-tj","provider":"Platinum High Performance Solutions, LLC.","version":"1.0","type":"link"}