{"product_id":"y-link-steering-using-gm-1-ton-tre","title":"Y Link Steering Using GM 1 Ton TRE","description":"\u003cp\u003eThis is your not so basic steering setup that mocks the factory setup with easier adjustment \u0026amp; much stronger tubing. The kit can be used with stock steering position on the knuckle or High Steer arms. The taper is the standard GM 1 ton.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe adjustment is easier because we add Hex Head TRE weld bungs so a crescent wrench is your adjustment tool, not a pipe wrench, which will scar the tube and if too deep, cause a major stress riser. Not to mention what it does to the paint... \u003cbr\u003e\u003cbr\u003eThese are stronger than stock because we use 1.5\" X .25\" Wall DOM tubing and the TRE's are made for a 1 ton rig and much larger than stock. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eYou will receive:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/15X25DOM.html\"\u003e2 - 54\" of 1.5\" X .25\" wall DOM tubing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/7818TA.html\"\u003e2 RH - 7\/8\" Hex Head Weld Bungs\u003c\/a\u003e, 18TPI for Tie Rod Ends\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/R1404.html\"\u003e2 LH - 7\/8\" Hex Head Weld Bungs\u003c\/a\u003e, 18TPI for Tie Rod Ends\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/7818JAM.html\"\u003e2 RH - 7\/8\" Jam Nuts\u003c\/a\u003e, 18TPI for Tie Rod Ends\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/R1942.html\"\u003e2 LH - 7\/8\" Jam Nuts\u003c\/a\u003e, 18TPI for Tie Rod Ends\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/YLINKREPLACE.html\"\u003e4 - Tie Rod Ends, 1 for the Y Link, 2 for the Tie Rod, \u0026amp; 1 High Angle TRE\u003c\/a\u003e for the pitman arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eWe supply more DOM than you need because it is way too easy to make a mistake in your calculations and you can always cut tube, growing it back is the hard part!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eThis is a do it yourself style kit that requires welding by a competent person with the right equipment, don't skimp, do it right! You will need to check clearances with the steering at lock to see if you need to add any bends before you cut it down to clear diff covers, sway bar mounts, etc\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdditional Products you may need to install this kit:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTapered knuckle inserts. (Qty 2 for this kit)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/INSSTEER.html\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/graphics\/00000001\/R1354-R1468-full.jpg\" alt=\"\" width=\"146\" height=\"97\"\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHigh angle tapered knuckle inserts (Qty 1 for this kit)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/DLINSERT.html\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/graphics\/00000001\/R1589-full.jpg\" alt=\"\" width=\"141\" height=\"94\"\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e90 degree steering stabilizer bracket\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/R1717.html\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/graphics\/00000001\/R1717-full.jpg\" alt=\"\" width=\"180\" height=\"120\"\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFlat mount steering stabilizer bracket\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/R1713.html\"\u003e\u003cem\u003e\u003cimg src=\"https:\/\/www.ruffstuffspecialties.com\/catalog\/graphics\/00000001\/R1713-Extra1-full.jpg\" alt=\"\" width=\"189\" height=\"126\"\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Far From Stock Ruffstuff","offers":[{"title":"Over Knuckle","offer_id":50360605507870,"sku":"R1305  +Over Knuckle (RuffStuff)","price":556.0,"currency_code":"CAD","in_stock":true},{"title":"Under Knuckle","offer_id":50360605540638,"sku":"(R1305) + under the knuckle (ruff stuff)","price":556.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/7171\/1262\/files\/R1305-full_eac98b93-be87-469d-b9a2-cef42d25413f.jpg?v=1780435715","url":"https:\/\/platinumhpsolutions.myshopify.com\/fr\/products\/y-link-steering-using-gm-1-ton-tre","provider":"Platinum High Performance Solutions, LLC.","version":"1.0","type":"link"}