Delete the factory press in Ball Joint and transition to a double shear 1/4" bracket. While the bracket is located and reinforced by the factory casting, welding the bracket to the axle tube is required. 

• Designed for axle swap installations where a custom track bar is needed.
• In the Under The Casting location the factory radius arm bracket will need to be trimmed slightly for hardware and tool clearance. This is required before welding. 
• Welding is required.
• 2" Mounting Width
• 5/8" Track Bar Bolt

Under The Casting

In the Under The Casting location the factory radius arm bracket will need to be trimmed slightly for hardware and tool clearance. This is required before welding.  

Over The Casting