ZZPerformance

Provides standalone management of air/fuel mixture onvehicles with frequency based MAF systems. This Mini-AFC allows adjustments to MAF(Mass Air Fl...

Mobil 1 Extended Performance Oil Filters offer the ultimate protection for your engine. In fact, Mobil 1 oil filters provide up to 15,000 miles of ...

These are front and rear poly sway bar inserts, they are stiffer than the OEM rubber bushings for better performance by reducing body roll. Front 3...

MOTUL RBF 660 Racing Factory Line DOT 4 100% Synthetic Brake Fluid may be used for all types of hydraulic brake and clutch actuators requiring non-...

The WOT Box adds two major features to any car. They are No-lift shifting and 2-step launch control.  Both of these features are completely user-p...

  Sold in sets of 6. If you order a quantity of 1 will receive 6 spark plugs. Economical performance and improved ignitability over standard NGK Sp...

This allows you to use the 75mm inlet/outlet 2000+ Northstar throttle body with a L67(Gen3) or L32(Gen5) supercharger. The dual pattern design allo...

This is a stock replacement IAC or Idle Air Control valve for a Northstar throttle body. If you need one for the stock throttle body you will need ...

This is a replacement gasket that slides into the grove on the backside of the 00+ Northstar throttle body. It is rubber and reusable.

This is a custom bracket for using a Northstar throttle body on a Grand Prix. Made for the newer style N* throttle body.

Universal weld in O2 sensor bung. Made from stainless steel, it allows the exhaust gas temperature sensor to be attached to the exhaust manifold or...

This is an O2 bung extender that can help with fitment in the downpipe tunnel. It is made from Stainless steel, has straight and a 90 degree bend s...

Plugs an O2 bung hole where an O2 sensor would normally be. Thread: m18 x 1.5

Most header kits will require this because the primary (front) O2 sensor is mounted further down the header rather than right next to the head like...

This is an OEM replacement oxygen sensor. It will restore lost fuel economy and perform equal to OE. The use of leaded gas or additives is prohibit...

With the stock PCM located inside of the air filter box, many are left wondering what to do with it after purchasing an aftermarket intake. This PC...

This is a universal oil catch can kit. It is intended for high boost applications where the factory PCV cannot flow enough to maintain proper crank...

Oil filter adapter to timing cover: 22 ft/lbs 97 earlier 132 in/lbs + 50 degrees 97 and later Oil pump

 This oil neck spacer for the 3800 moves the oil filter extension housing 1/8" away from the crank pulley. This allows easier install of oversized ...

This is a new replacement oil pan gasket for cars that come with a pressed steel oil pan, and the 2004+ specific Grand Prix.  This is the most comm...

It fits the following models: BUICK ALLURE (2005 - 2009) BUICK LACROSSE (2005 - 2009) BUICK LUCERNE (2006 - 2008) BUICK REGAL (1996 - 2004...

Items Included in this kit: Machined oil pump cover (extra clearance for double roller chain) Oil pump gears Oil pressure spring All brand ne...

We recommend switching to the 2004 GM spec of 5w30 oil at the time of installation. We also recommend synthetic motor oil once your engine is broke...