This is a universal oil catch can kit. It is intended for high boost applications where the factory PCV cannot flow enough to maintain proper crankcase pressure. It connects your crankcase vent tube to your intake tube. As the intake tube draws a vacuum it will pull the gases from crankcase, and if pressure builds in the crank case it will vent into the intake instead of to atmosphere. The catch can holds the oil as it accumulates in the can. It will need to be drained, how often?, that depends on how much blowby your engine has.

Includes:

• Can w/ fittings
• Can bracket
• 3/8" hose
• Hose clamps

16mm x 1.5mm thread for the top two in/out holes.

10mm x 1.0mm for the drain.

2 mounting holes on the back 6mm x 1mm.

16 oz capacity. Not baffled. This is a universal application can, you will need to fabricate or find mounting provisions.